WiFi and scales RS232 Manual de usuario Pagina 9

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 8
Quick Start Guide Serial to WiFi Adapter www.wifiandscales.com
After configuring the two units you should have settings similar to the example below.
PC <--> NRE801/1
NRE801/2 <--> SCALE
/wl/ssid
vetek_demo
/wl/ssid
vetek_demo
/wl/key
/wl/key
/net/dhcp
0
/net/dhcp
0
/net/ip
192.168.0.70
/net/ip
192.168.0.71
/net/mask
255.255.255.0
/net/mask
255.255.255.0
/net/gw
0.0.0.0
/net/gw
0.0.0.0
/proxy/mode
client
/proxy/mode
server
/proxy/baudrate
57600
/proxy/baudrate
9600
/proxy/ip
192.168.0.71
/proxy/ip
0.0.0.0
/proxy/port
2000
/proxy/port
2000
/app/mode
proxy
/app/mode
proxy
In the serial cable proxy mode the client end can also be a telnet client of a PC.
Start telnet with the command >telnet IP-address port
With the settings from the example above >telnet 192.168.0.71
5 Using the WiFi Adapter in serial cable proxy mode
Plug in the WiFi Adapter to the scale’s RS-232 port.
Plug the WiFi Adapter set to client into a serial port of a PC or other device that can
communicate with the scale.
Power up both units, shortly they will be connected to the wlan and found each other.
Vista de pagina 8
1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios